Although the heating of the motor during the operation of the servo-electric bending machine usually does not affect its service life, most customers should not ignore it, in severe cases it will burn out the motor. To determine whether the motor of the bending equipment can be burned out, the first is the smell, open the junction box, remove the end joint, and measure whether the three phases can be short-circuit. The bridge test is used to measure the inter-turn short circuit, and the ground resistance is measured by the swing meter. Touch whether the motor temperature of the bending device is high.

When the servo-electric bending machine hydraulic system leaks, it can reduce the number of tubing joints to avoid leakage, reduce hydraulic shock and mechanical vibration, extend the reversing time, regular inspection, regular maintenance, timely treatment, and avoid leakage.

servo-electric bending machine sometimes occurs in the hydraulic system heating phenomenon at work, the internal reason is the system design is not reasonable, such as the component matching is not reasonable, the pipeline channel is too thin. The bending radius is small, the tank volume is insufficient, and the external reason is the improper amount of oil in the hydraulic system.

1.servo-electric bending machine selection touch screen and CNC machine control module, program flow setting is simple and easy;

2. The bed structure is stable and not easy to deform;

3. Each file can be set up 16 corners, memory can store 16 groups of files;

4.servo-electric bending machine has slow positioning function, stable bending Angle, repeatability up to ±0.1°;

5. An error message is displayed on the screen to help the operator remove it immediately;

6. Provide self-developed coordinate conversion bending processing values, software can be purchased and installed on the desktop editing calculation.

servo-electric bending machine https://www.john-sheng.com/Automatic-CNC-servo-hydraulic-tube-bender-for-seat-frame-and-sports-frame.html